SpaceX to launch ISRO's GSAT-N2 satellite from US on Monday

CHENNAI: SpaceX is targeting Monday (tomorrow) for Falcon 9's launch of ISRO's advanced communication satellite 4,700 kg GSAT-N2 into a Geosynchronous Transfer Orbit (GTO) from Space Launch Complex 40 (SLC-40) at Cape Canaveral Space Force Station in Florida, US.

The two-hour window opens at 1:31 p.m. ET. If needed, a backup opportunity is available on Tuesday, November 19 during a two-hour window that opens at 4:33 a.m. ET, SpaceX said in its website.

This will be the 19th flight for the Falcon 9 first stage booster supporting this mission, which previously launched SES-22, ispace's HAKUTO-R MISSION 1, Amazonas-6, CRS-27, Bandwagon-1, and 13 Starlink missions.

After stage separation, the first stage will land on the Just Read the Instructions droneship, which will be stationed in the Atlantic Ocean.

GSAT-20 (also known as CMS-03 or GSAT-N2) is a communication satellite developed by ISRO and will be launched by a SpaceX Falcon 9, ISRO said.

It will be a commercial mission. Though ISRO's LMV-3 which has the capacity to launch satellites weighing upto 4,000 kg into the GTO, the Indian Space Agency chose to launch it using Elon Musk-owned SpaceX's Falcon-9 launch vehicle from US, as it weighed 4,700 kg. This will be ISRO's first commercial launch using SpaceX.

The GSAT-20, funded, owned and operated by New Space India Limited (NSIL), will be a continuation of GSAT series of communication satellites and is intended to add data transmission capacity to the communication infrastructure required by Smart Cities Mission of India.

The entire capacity onboard CMS-02 satellite will be leased to Dish TV.

GSAT-N2 (GSAT-20) is a Ka-band High throughput communication satellite of NewSpace India Limited (NSIL), a Government of India company under the Department of Space and the commercial arm of ISRO. GSAT-N2 is the 2nd Demand Driven satellite of NSIL.

GSAT-N2 is set to enhance broadband services and in-flight connectivity (IFC) across the Indian region.

This satellite, featuring multiple spot beams and wideband Ka x Ka transponders, aims to support a large subscriber base with small user terminals, significantly boosting system throughput through its multi-beam architecture which allows frequency reuse.

GSAT-N2, with a lift-off mass of 4700 kg, has a mission life of 14 years.

The satellite is equipped with 32 user beams, comprising 8 narrow spot beams over the Northeast region and 24 wide spot beams over the rest of India. These 32 beams will be supported by hub stations located within mainland India. The Ka-Band HTS communication payload provides a throughput of approximately 48 Gbps.

The payload consists of three parabolic 2.5-meter deployable reflectors with multiple feeds generating 32 spot beams over the Indian region using a single feed per beam configuration.

The GSAT-N2 spacecraft structure is based on the standard Carbon Fiber Reinforced Polymer (CFRP)-based I4K bus. GSAT-N2 is compatible with all major launch vehicles. The thermal control configuration includes both active elements, such as heat pipes and heaters, and passive elements, like multi-layer insulation (MLI) blankets, optical solar reflectors (OSR), thermal paints, and coatings, as used in earlier missions.

The Solar Array deployment mechanisms on the North and South sides of the spacecraft are used for the deployment of N&S Solar arrays. Each Ka-band antenna is equipped with Deployment and Pointing mechanisms for in-orbit deployment and precise pointing of the antennae.

The propulsion system of GSAT-N2 is configured with a unified bi-propellant chemical propulsion system employing MON3 as oxidizer and MMH as fuel. GSAT-N2's power system is a single fully regulated 70V bus, consisting of solar panels for power generation, Li-Ion batteries for energy storage and peak load support, and power electronics for power conditioning and distribution.

The electrical power system is designed to meet a power requirement of approximately 6 kW.

The Attitude and Orbit Control System (AOCS) uses a body-stabilized, momentum-biased system with momentum/reaction wheels to provide a stable platform for communication. Together with the propulsion subsystem, AOCS offers the capability of 3-axis attitude control using thrusters in the transfer orbit as well as orbit raising and fine orbit corrections.

The satellite carries a Sun Sensor, Earth Sensor, Inertial Reference Unit (IRU), and Star Sensor.

All sensors provide attitude data in the form of absolute attitude, while the IRU provides attitude rates and incremental angles about all the axes.